Skip to content
Lizora Infotech
Request Quote

Lysora · Managed Switches

LS2-8GT2SFP-P

8-Port Layer 2 Managed PoE Switch

PricingContact for Best Price
Ports
8× 10/100/1000BASE-T PoE/PoE+
Uplinks
2× 1GE SFP
PoE budget
125 W
Layer
Layer 2 managed
Cooling
Fanless
Warranty
3 years (manufacturer)
  • Ready Stock
  • PAN India Supply
  • Same Day Dispatch*
  • GST Billing
  • BOQ Assistance

*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.

Key Features

What the LS2-8GT2SFP-P is built to do

125 W PoE/PoE+ budget

Powers 8 devices at PoE+ levels; rated for 80 cameras (200 W H.265 profile).

2× SFP fiber uplinks

Carry aggregated edge traffic to the core over fiber, past copper's 100 m limit.

L2 management

802.1Q VLANs up to 4094, DHCP snooping, IP-MAC-port binding, loop prevention.

Cloud management support

Managed locally via web or centrally through Lysora Cloud.

Fanless steel body

Silent desktop case with included rack-mount brackets and grounding cable.

Site-grade protection

±6 kV surge protection and 6 kV contact / 8 kV air ESD ratings.

Technical Specifications

LS2-8GT2SFP-P specifications

Specifications as published for this model. Confirm project-critical values against the datasheet before ordering.

Interfaces specifications
Interfaces
RJ45 ports8× 10/100/1000BASE-T, PoE/PoE+
SFP slots2× 1GE SFP
PoE specifications
PoE
StandardPoE/PoE+
Total budget125 W
Camera capacity80 (200 W H.265) / 40 (400 W H.265)
Switching Performance specifications
Switching Performance
Switching capacity20 Gbps
Forwarding rate14.88 Mpps
MAC address table8,000 entries
Packet buffer4.1 Mbit
Flash memory16 MB
L2 Features specifications
L2 Features
VLANUp to 4094
SecurityDHCP snooping, IP-MAC-port binding, loop prevention
ManagementWeb; cloud management support
Physical & Environmental specifications
Physical & Environmental
Dimensions300 × 205 × 44 mm
Weight1.80 kg
CoolingFanless
Power supply100–240 V AC, 50/60 Hz
Consumption11 W (no PoE) / 145 W (full PoE)
Operating temperature0 °C to +50 °C
MTBF400,000 hours
Surge protection±6 kV
ESD protection6 kV contact / 8 kV air
Compliance & Warranty specifications
Compliance & Warranty
CertificationsFCC, IC, cTUVus
Warranty3 years
In the boxManual, warranty card, rubber pads, 1.5 m power cord, grounding cable, rack brackets, screws, cord retention clip

Specifications sourced from the official Lysora catalogue. Where official pages disagree on a value, it is marked and confirmed during quotation.

Overview

About the LS2-8GT2SFP-P

The Lysora LS2-8GT2SFP-P is an 8-port gigabit Layer 2 managed PoE switch with a 125 W PoE/PoE+ budget and two SFP uplink slots. It powers cameras, access points, and IP phones while providing the L2 controls — VLANs up to 4094, DHCP snooping, IP-MAC-port binding, and loop prevention — that keep edge traffic segmented and stable.

The switch is fanless in a desktop steel case and is cloud-management capable alongside its web interface. Lysora rates it for 80 cameras at a 200 W H.265 profile and 40 at 400 W.

In deployments it sits at the PoE edge under an aggregation switch, with the SFP slots carrying fiber uplinks back to the core. It pairs with the larger LS2-24GT4SFP-P where port counts grow.

Applications

Where the LS2-8GT2SFP-P is deployed

Power camera strings with L2 isolation — rated for up to 80 cameras.

PoE+ for ceiling APs with VLAN-mapped SSIDs.

Phones, desktops, and door access on one managed switch.

Per-floor PoE with fiber uplinks in hotels and offices.

Downloads

LS2-8GT2SFP-P documents

Datasheets and manuals are shared without sign-up. Documents not yet hosted online are sent on request within working hours.

Related Products

Pairs with the LS2-8GT2SFP-P

Edge PoE switches below it, SFP+ modules in its uplinks, and sibling models for smaller or larger sites.

Why Buy From Lizora Infotech

A supply partner, not just a price list

Ready Stock Availability

Fast-moving SKUs held in the Delhi NCR warehouse, with availability confirmed on every quotation.

PAN India Supply Network

Surface and air cargo delivery to every state, with GST invoicing and e-way bills handled end to end.

BOQ & Solution Consultation

Bill-of-quantities reviewed line by line, with alternatives suggested for out-of-stock or discontinued items.

Technical Pre-Sales Consulting

Switch sizing, PoE budgets, VLAN design, and GPON planning reviewed by our technical team before you commit.

Dedicated B2B Sales Support

A named point of contact for quotes, stock checks, and RMA — not a ticket queue.

Before You Enquire

Frequently asked questions

How many cameras can the LS2-8GT2SFP-P power?

Lysora rates the LS2-8GT2SFP-P for 80 cameras on a 200 W H.265 profile and 40 on a 400 W profile, within its 125 W PoE/PoE+ budget across 8 ports. Actual counts depend on per-camera draw — share your camera model for exact sizing.

Request a sizing quote

Does the LS2-8GT2SFP-P support VLANs?

Yes. It is a Layer 2 managed switch supporting VLANs up to 4094, along with DHCP snooping, IP-MAC-port binding, and loop prevention — enough to isolate camera, voice, and data traffic at the edge.

Is the LS2-8GT2SFP-P fanless?

Yes. The switch uses a fanless desktop steel case rated for 0–50 °C operation with a 400,000-hour MTBF, making it suitable for offices and equipment shelves where fan noise matters.

What is the price of the LS2-8GT2SFP-P in India?

Pricing is quotation-based with dealer slabs for registered partners. Send a quote request naming the LS2-8GT2SFP-P and quantity, and you receive priced options with stock confirmation within 24 working hours.

Request pricing

Tell us what you need — get a quote today

Four fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.

Send your requirement, get a quote today

Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.

Prefer to talk? +91 98910 20998