Wireless Access Points- Wi-Fi 7 BE5040
- 511 clients
- 2.5G port
Industry
Networking for hotels, resorts, and venues
Property-wide guest Wi-Fi and back-of-house networking — per-room coverage, seamless roaming, event-hall density, and guest traffic isolated from property systems.
- Ready Stock
- PAN India Supply
- Same Day Dispatch*
- GST Billing
- BOQ Assistance
*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.
Industry Overview
Networking for hospitality
In hospitality the network is a guest amenity that is only noticed when it fails. A property must deliver consistent per-room coverage through masonry, hold up when a banquet hall fills, let guests roam without re-authenticating, and keep guest traffic off property systems such as PMS, CCTV, and door locks.
For integrators, the recurring build is wall- and ceiling-mounted access points powered over Ethernet, higher-capacity units for public areas, isolated guest VLANs, and wireless bridges for annexes and outdoor blocks. Coverage is planned per room, because a corridor-end access point cannot serve rooms behind masonry.
Lizora Infotech supplies the wireless, PoE switching, and bridging for these builds from ready stock across India.
Typical Network Requirements
What this sector's networks need
Recommended Product Categories
Where to start in the catalogue
The categories most relevant to this sector. Every product ships from ready stock with GST billing and PAN-India delivery.
Recommended Products
Models that fit this sector
From the official Lysora catalogue, matched to the requirements above. Final selection is confirmed against your BOQ.
- Wireless Access Points
Wireless Access Points- Wi-Fi 7 BE3600
- 2.5G port
- Volume unit
Wireless Access Points- Wi-Fi 6 AX3000
- 512 clients
- WPA3
PoE Switches- 24× GbE PoE+
- 370 W budget
- 1U rack
Deployment Best Practices
How these networks are built well
- Plan coverage per room, not per floor; masonry and lift shafts need access points closer to the guest.
- Isolate guest traffic on its own VLAN, separated from PMS, CCTV, door locks, and back office.
- Enable assisted roaming so guests move between floors and public areas without dropping sessions.
- Apply per-SSID rate limiting so event streaming does not congest operational traffic.
- Use wireless bridges for annexes, poolside, and outdoor blocks where new cabling is impractical.
Infrastructure Considerations
What the physical build involves
- PoE switching to power in-room and public-area access points without local adapters.
- A sized internet edge with per-SSID rate limiting for events and peak check-out.
- Central management across floors and blocks for consistent SSIDs and policy.
- Wireless bridges to link annex buildings and outdoor areas.
Business Challenges
What drives the requirement
Before You Enquire
Frequently asked questions
How do you deliver reliable in-room Wi-Fi?
By planning coverage per room rather than per floor and placing access points closer to guests where masonry blocks signal. Share a floor plan and room count and we work through placement and counts with you.
Hotel Wi-Fi solutionCan guests roam without logging in again?
Yes. With 802.11k/v/r and a consistent SSID, guests move between access points and floors without re-authenticating — essential for voice and video calls.
Choosing enterprise access pointsHow is guest traffic kept off property systems?
Guest Wi-Fi runs on an isolated VLAN with client isolation, logically separated from property management, CCTV, and door-lock systems on the same cabling.
Can you cover outdoor and annex areas?
Yes. Outdoor-rated access points cover courtyards and poolside, and wireless bridges link annex blocks where trenching is impractical. Reach depends on line of sight and distance, confirmed at survey.
See wireless bridgesRelated Resources
Background reading
Guides from our technical team relevant to this sector.
Related Solutions
Deployments for this sector
Solution guides with challenges, workflow, and recommended products.
- Hotel WiFi SolutionsHigh-density wireless for guest rooms, lobbies, and banquet halls — per-room coverage, seamless roaming, and guest traffic kept off the property network.Explore range
- Surveillance Network SolutionsPoE backbones for IP CCTV — camera counts sized against the power budget, a segregated surveillance VLAN, and industrial switching for outdoor and harsh sites.Explore range
- Office Network SolutionsStructured switching, PoE, and Wi-Fi for offices of 50–300 users needing VLAN segmentation, centralised management, and room to scale.Explore range
Related Industries
Adjacent sectors
Industries with overlapping requirements and equipment.
- RetailCompact, repeatable store networks and multi-site rollout — segmented POS and CCTV, isolated customer Wi-Fi, PoE, and cloud management from head office.Explore range
- EnterpriseStructured, segmented networks for multi-floor and multi-building enterprises — core-to-access design, fibre aggregation, multi-gig Wi-Fi, and central management.Explore range
- SMBRight-sized, affordable networks for small and medium businesses — a compact managed core, PoE for cameras and Wi-Fi, and room to grow without over-buying.Explore range
Tell us what you need — get a quote today
Four fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.
Send your requirement, get a quote today
Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.
Prefer to talk? +91 98910 20998