PoE Switches- 24× GbE PoE+
- 370 W budget
- 1U rack
Solution
Surveillance networks that power every camera
PoE backbones for IP CCTV — camera counts sized against the power budget, a segregated surveillance VLAN, and industrial switching for outdoor and harsh sites.
- Ready Stock
- PAN India Supply
- Same Day Dispatch*
- GST Billing
- BOQ Assistance
*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.
Overview
About surveillance network solutions
An IP surveillance network is a power-distribution problem as much as a data one. Every camera draws PoE, and the constraint that decides how many cameras a switch can run is the total power budget, not the port count. Get the budget wrong and cameras drop off at peak — exactly when they matter.
This solution sizes PoE switching against the real camera load, keeps surveillance traffic on its own VLAN away from other systems, and uses industrial switching in outdoor cabinets and harsh sites where commercial hardware fails. Fibre uplinks carry camera streams back from distant poles and perimeters beyond the copper limit.
Storage, retention, and camera selection are confirmed against the surveillance plan; the network's job is to power the cameras reliably and carry their streams to the recorder without loss.
Common Challenges
What this solution solves
Recommended Product Categories
Where to start in the catalogue
The categories most relevant to this deployment. Every product ships from ready stock with GST billing and PAN-India delivery.
- Managed SwitchesL2/L2+ switches with VLAN, QoS, and CLI/cloud controlExplore range
- PoE SwitchesPower cameras, APs, and phones over a single cableExplore range
- Industrial SwitchesDIN-rail, wide-temperature, surge-protectedExplore range
- Media ConvertersFiber-to-copper conversion for long runsExplore range
Recommended Products
Models that fit this deployment
From the official Lysora catalogue, matched to the requirements above. Final selection is confirmed against your BOQ.
- PoE Switches
Managed Switches- 8× 2.5G PoE+
- 2× 10G SFP+
- L2 + static routing
Industrial Switches- 8× GbE PoE+
- 240 W
- -40 to +65 °C
PoE Switches- 16× GbE PoE+
- 250 W budget
- 2× SFP
Deployment Workflow
From planning to support
1. Planning
We work from your device counts, coverage areas, and growth plans to define the topology, VLAN plan, and power budget before anything is quoted.
2. Site survey
Cable routes, rack and cabinet locations, environmental conditions, and existing infrastructure are confirmed — on site or from your drawings.
3. BOQ & quotation
A line-by-line bill of quantities with stock status, priced within 24 working hours, with alternatives suggested for anything out of stock.
4. Installation
Hardware is dispatched with GST invoice and e-way bill. Installation is handled by your team or your integrator; we supply the equipment and documentation.
5. Configuration
VLANs, uplinks, PoE budgets, SSIDs, and management are configured to the plan agreed at the planning stage. Configuration support is available on request.
6. Testing
Links, power delivery, roaming, and throughput are verified against the design before handover, so issues surface before the network goes live.
7. Support
A named point of contact for stock, RMA, and replacements under the standard manufacturer warranty, serviced in India by Lizora Infotech.
Deployment Considerations
Practical advice for this deployment
- Size the PoE budget from the actual draw of every camera; PTZ units with heaters draw far more than fixed domes, and the total budget — not the port count — is the limit.
- Keep surveillance traffic on a dedicated CCTV VLAN, isolated from office, POS, clinical, or control networks.
- Use industrial, wide-temperature switching for outdoor cabinets, poles, and perimeters where commercial hardware fails.
- Provision uplink capacity so aggregated camera streams reach the recorder without loss at peak.
- Storage, retention, and camera selection are confirmed against the surveillance plan; the network powers and carries the streams reliably.
Before You Enquire
Frequently asked questions
How many cameras can one PoE switch power?
It depends on the total PoE budget and each camera's draw, not on the port count. A switch cannot run every port at maximum power simultaneously. Send the camera model list and count and we size the switch against the real load.
Understanding PoE standardsShould CCTV be on its own network?
Yes. Cameras run on a dedicated surveillance VLAN, logically isolated from office, POS, clinical, or control traffic on the same cabling, which contains both bandwidth and security risk.
Layer 2 vs Layer 3 explainedCan you power cameras in outdoor cabinets?
Yes. Industrial, wide-temperature switching powers PTZ and perimeter cameras in outdoor and roadside cabinets where commercial switches fail. The DC input and PoE budget are checked against the camera load.
See industrial switchesHow are cameras on distant poles connected?
Fibre uplinks carry camera streams from poles, gates, and perimeters beyond the 100 m copper limit, with media converters or SFP ports terminating the fibre at each end.
See media convertersDo you supply cameras and recorders too?
Our scope is the PoE switching and transport that power the cameras and carry their streams. Camera and NVR selection, storage, and retention are confirmed against your surveillance plan during design.
Related Resources
Background reading
Guides from our technical team relevant to this deployment.
Related Solutions
Solutions often planned together
Adjacent deployments that share equipment and design decisions.
- Office Network SolutionsStructured switching, PoE, and Wi-Fi for offices of 50–300 users needing VLAN segmentation, centralised management, and room to scale.Explore range
- Warehouse Connectivity SolutionsRugged switching and wide-area wireless for warehouses and yards — scanner and forklift coverage, long cable runs solved with fibre, and cameras over PoE.Explore range
- Manufacturing Network SolutionsIndustrial switching and segregated networks for factories — OT/IT separation, DIN-rail hardware for panels and cabinets, and PoE for cameras at the harsh edge.Explore range
Related Industries
Sectors that deploy this
Industry pages with sector-specific requirements and recommendations.
- GovernmentSwitching, surveillance, and connectivity for PSU, municipal, and smart-city builds — segmented networks, outdoor-rated hardware, and line-item BOQs for tender supply.Explore range
- RetailCompact, repeatable store networks and multi-site rollout — segmented POS and CCTV, isolated customer Wi-Fi, PoE, and cloud management from head office.Explore range
- ManufacturingIndustrial switching and OT/IT segregation for plants and warehouses — DIN-rail hardware for panels, wide-temperature ratings, fibre backbones, and PoE at the edge.Explore range
Tell us what you need — get a quote today
Four fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.
Send your requirement, get a quote today
Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.
Prefer to talk? +91 98910 20998