Industrial Switches- 8× GbE PoE+
- 240 W
- -40 to +65 °C
Industry
Networking for factories and industrial plants
Industrial switching and OT/IT segregation for plants and warehouses — DIN-rail hardware for panels, wide-temperature ratings, fibre backbones, and PoE at the edge.
- Ready Stock
- PAN India Supply
- Same Day Dispatch*
- GST Billing
- BOQ Assistance
*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.
Industry Overview
Networking for manufacturing
Manufacturing networks share space with machinery, heat, dust, and vibration, and carry two different worlds of traffic: operational technology — PLCs, sensors, and control systems — and standard IT. Keeping them apart, and keeping hardware alive in a control panel rather than a server room, is what defines an industrial network.
For integrators, the recurring requirements are DIN-rail, fanless, wide-temperature switching, VLAN segregation of OT from IT and CCTV, fibre uplinks between buildings, and PoE for cameras at the harsh edge. Certifications are quoted only as published on the datasheet.
Lizora Infotech supplies industrial and commercial switching, wireless, and optical transport for these plants from ready stock, with pre-sales review of the segmentation and power design.
Typical Network Requirements
What this sector's networks need
Recommended Product Categories
Where to start in the catalogue
The categories most relevant to this sector. Every product ships from ready stock with GST billing and PAN-India delivery.
- Managed SwitchesL2/L2+ switches with VLAN, QoS, and CLI/cloud controlExplore range
- PoE SwitchesPower cameras, APs, and phones over a single cableExplore range
- Industrial SwitchesDIN-rail, wide-temperature, surge-protectedExplore range
- Media ConvertersFiber-to-copper conversion for long runsExplore range
Recommended Products
Models that fit this sector
From the official Lysora catalogue, matched to the requirements above. Final selection is confirmed against your BOQ.
- Industrial Switches
Industrial Switches- 7× PoE+ + 1× PoE++
- 300 W max
- -40 to +75 °C
Wireless Access Points- Outdoor IP65
- Wi-Fi 7 BE5040
- -30 to +65 °C
Managed Switches- 24× RJ45
- 4× SFP
- Fanless 1U
Deployment Best Practices
How these networks are built well
- Segregate OT — PLCs, sensors, and control systems — from IT and CCTV using VLANs.
- Use DIN-rail, fanless, wide-temperature switching in panels, cabinets, and unconditioned areas.
- Check available panel DC voltage against the PoE budget before committing.
- Prefer fibre between buildings for distance and immunity from induced voltage.
- Design ring or redundant-path topology and surge protection per site at survey.
Infrastructure Considerations
What the physical build involves
- Industrial switches on DIN rail inside control panels and cabinets.
- Fibre backbone between buildings with media converters or SFP termination.
- PoE-capable industrial switching for cameras at the harsh edge.
- Redundant or ring topology on production lines where uptime is critical.
Business Challenges
What drives the requirement
Before You Enquire
Frequently asked questions
How do you separate control systems from IT?
OT traffic — PLCs, sensors, and control systems — runs on its own VLAN, logically separated from IT and CCTV on shared industrial cabling, so a storm or compromise on one segment cannot reach control systems.
Industrial Ethernet basicsWhy can't commercial switches be used on the floor?
Commercial switches are rated for roughly 0–50 °C in ventilated rooms. Factory panels and cabinets run hotter and dustier, so industrial, fanless, wide-temperature switches are used there for reliability.
Industrial switch buying guideWhat certifications do the switches carry?
Certifications are as published by the manufacturer on each product datasheet. We do not claim compliance beyond what is documented; confirm project-critical certifications on the datasheet before ordering.
See industrial switchesDo you design redundant topologies?
Ring and redundant-path designs reduce the impact of a single cable fault on a running line. The specific topology and surge protection are designed per site against the plant layout.
Manufacturing network solutionRelated Resources
Background reading
Guides from our technical team relevant to this sector.
Related Solutions
Deployments for this sector
Solution guides with challenges, workflow, and recommended products.
- Manufacturing Network SolutionsIndustrial switching and segregated networks for factories — OT/IT separation, DIN-rail hardware for panels and cabinets, and PoE for cameras at the harsh edge.Explore range
- Warehouse Connectivity SolutionsRugged switching and wide-area wireless for warehouses and yards — scanner and forklift coverage, long cable runs solved with fibre, and cameras over PoE.Explore range
- Surveillance Network SolutionsPoE backbones for IP CCTV — camera counts sized against the power budget, a segregated surveillance VLAN, and industrial switching for outdoor and harsh sites.Explore range
Related Industries
Adjacent sectors
Industries with overlapping requirements and equipment.
- GovernmentSwitching, surveillance, and connectivity for PSU, municipal, and smart-city builds — segmented networks, outdoor-rated hardware, and line-item BOQs for tender supply.Explore range
- EnterpriseStructured, segmented networks for multi-floor and multi-building enterprises — core-to-access design, fibre aggregation, multi-gig Wi-Fi, and central management.Explore range
- ISPGPON access, aggregation switching, and fixed-wireless backhaul for internet service providers — subscriber distribution, last-mile delivery, and scalable cores.Explore range
Tell us what you need — get a quote today
Four fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.
Send your requirement, get a quote today
Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.
Prefer to talk? +91 98910 20998