Managed Switches- 48× GbE PoE+
- 370 W budget
- 4× SFP
Lysora · Managed Switches
Layer 3 Managed Switch
*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.
Key Features
Technical Specifications
Specifications as published for this model. Confirm project-critical values against the datasheet before ordering.
| Interfaces | |
|---|---|
| SFP ports | 24× 1GE SFP, 8 shared as RJ45 combo |
| SFP+ slots | 4× 10GE SFP+ |
| Switching Performance | |
|---|---|
| Switching capacity | 128 Gbps |
| Forwarding rate | 95.23 Mpps |
| MAC address table | 16,000 entries |
| Packet buffer | 12 Mbit |
| Flash memory | 256 MB |
| L3 Features | |
|---|---|
| Routing | Static, OSPFv2/v3 |
| Policy | ACL, QoS |
| Resilience | VCS / dual backup |
| VLAN | Up to 4094 |
| Physical & Environmental | |
|---|---|
| Dimensions | 440 × 267.5 × 43.6 mm (1U) |
| Weight | 3.35 kg |
| Power supply | 100–240 V AC |
| Consumption | 41.8 W max |
| Operating temperature | 0 °C to +50 °C |
| MTBF | 400,000 hours |
| Compliance & Warranty | |
|---|---|
| Certifications | FCC, IC, cTUVus; NDAA compliant |
| Warranty | 3 years |
Specifications sourced from the official Lysora catalogue. Where official pages disagree on a value, it is marked and confirmed during quotation.
Overview
The Lysora LS3-24SFP/8GT4XS is a Layer 3 managed fiber aggregation switch: 24 gigabit SFP ports (8 of them RJ45 combo) plus four 10GE SFP+ ports, with 128 Gbps of non-blocking capacity. It terminates fiber uplinks from access switches across a campus and routes between their VLANs.
Routing covers static routes and OSPFv2/v3, with ACLs, QoS, and VCS/dual-backup resilience — the feature set for a small core or distribution layer without a chassis switch.
Fanless-quiet at 41.8 W maximum draw in a 1U body, it sits above the LS2 access family; PoE stays at the edge switches while this unit concentrates and routes.
Applications
Downloads
Datasheets and manuals are shared without sign-up. Documents not yet hosted online are sent on request within working hours.
Related Products
Edge PoE switches below it, SFP+ modules in its uplinks, and sibling models for smaller or larger sites.
Related Resources
Selection and background reading from our technical team.
Before You Enquire
Yes. It supports OSPFv2 and OSPFv3 alongside static routing, with ACLs and QoS at the aggregation layer — enough to route a multi-building campus without a chassis core. BGP is not listed for this model.
Eight of the 24 SFP ports are combo ports: each pairs an SFP slot with an RJ45 jack, and you use one of the two per port. That lets the same switch terminate fiber runs and connect nearby copper devices without wasting ports.
The 24 gigabit slots take standard 1G SFP modules and the four uplink slots take 10G SFP+. Lysora optics are compatibility-tested with this switch before dispatch; MSA-compliant third-party modules are also supported.
See SFP modulesPricing is quotation-based with dealer slabs for registered partners. Send a quote request naming the LS3-24SFP/8GT4XS and quantity, and you receive priced options with stock confirmation within 24 working hours.
Request pricingFour fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.
Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.
Prefer to talk? +91 98910 20998