Skip to content
Lizora Infotech
Request Quote

HPE Networking · PoE Switches

S5E31A – HPE Networking Instant On Switch 48p Gigabit 24p CL4 PoE 4p SFP 370W 1840

Forty-eight port rack switch with twenty-four Class 4 PoE ports and a 370 W budget — the flagship of the Series 1840.

PricingContact for Best Price
PoE ports
24× GbE Class 4 PoE (ports 1–24)
Access ports
24× GbE RJ45 (ports 25–48)
Uplinks
4× 1G SFP (ports 49–52)
PoE budget
370 W
Switching capacity
104 Gbps
Mounting
1U rack, 2-post kit included
  • Ready Stock
  • PAN India Supply
  • Same Day Dispatch*
  • GST Billing
  • BOQ Assistance

*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.

Key Features

What the S5E31A is built to do

370 W PoE budget

The largest in the series, across 24 Class 4 ports at up to 30 W each.

48 ports plus 4 SFP

Full-floor density with dedicated fibre uplinks.

104 Gbps / 77.37 Mpps

The 48-port platform with a 4 MB packet buffer.

Quieter than the non-PoE 48-port

3.4 Bel sound power against 3.9 Bel on the S5E30A.

Egress ACLs supported

512 egress entries, as on the S5E30A.

No licence fees

All features included in the hardware price.

Technical Specifications

S5E31A specifications

Specifications as published for this model. Confirm project-critical values against the datasheet before ordering.

Ports specifications
Ports
PoE ports24× RJ-45 autosensing 10/100/1000BASE-T with IEEE 802.3at Class 4 PoE (ports 1–24)
Access ports24× RJ-45 autosensing 10/100/1000BASE-T (ports 25–48)
Uplink4× SFP 1GbE ports (ports 49–52)
StandardsIEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T
Duplex10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Console portNot available
PoE specifications
PoE
Total PoE budget370 W Class 4 PoE
PoE port count24 of 48 access ports
Per-port maximumUp to 30 W (IEEE 802.3at)
Legacy supportIEEE 802.3af devices up to 15.4 W
Power allocationLLDP-MED automatic, class of PoE, or usage-based
SchedulingPoE scheduling and port scheduling
Performance specifications
Performance
Switching capacity104 Gbps
Throughput77.37 Mpps @ 64-byte packets
Latency (100 Mb, LIFO)< 8.0 µs
Latency (1000 Mb, LIFO)< 3.3 µs
MTBF122 years
Scale specifications
Scale
MAC address table16K entries
Maximum VLANs64
IGMP groups1K groups
Jumbo framesUp to 9216 bytes
IPv4/MAC ACL entries (ingress)50
IPv4/MAC ACL entries (egress)512
Maximum ACEs2048
Link aggregation groups16 (8 members per group)
Processor and Memory specifications
Processor and Memory
ProcessorARM Cortex-A9 @ 1.25 GHz
SDRAM1 GB DDR4
Flash512 MB NAND
Packet buffer4 MB
Physical specifications
Physical
Dimensions (D × W × H)14.45 × 17.48 × 1.73 in (36.70 × 44.40 × 4.40 cm)
Weight10.01 lb (4.54 kg)
Fans3 fixed fans, non field-replaceable
Primary airflowLeft to right
AcousticsSound power LWAd = 3.4 Bel; bystander sound pressure LpAm = 20 dB
MountingEIA-standard 19 in. rack or cabinet (2-post kit included); table-top; wall; under-table
Electrical specifications
Electrical
Power supply typeInternal power supply
AC voltage100–127 VAC / 200–240 VAC
Frequency50 Hz / 60 Hz
Current4.7 / 2.3 A
Power consumption (100% traffic)100–127 V: 55.6 W; 200–220 V: 54.4 W
Power consumption (100% traffic + 100% PoE)100–127 V: 466.1 W; 200–220 V: 452.6 W
Power consumption (idle)100–127 V: 24.4 W; 200–220 V: 24.2 W
Heat dissipation (100% traffic + 100% PoE)100–127 V: 1590.3 BTU/hr, 1677.9 kJ/hr; 200–220 V: 1544.2 BTU/hr, 1629.2 kJ/hr
Environment specifications
Environment
Operating temperature32 °F to 104 °F (0 °C to 40 °C)
Storage temperature−40 °F to 158 °F (−40 °C to 70 °C)
Operating humidity15% to 95% @ 104 °F (40 °C), non-condensing
Storage humidity15% to 95% @ 140 °F (60 °C), non-condensing
AltitudeUp to 10,000 ft (3 km)
Layer 2 Switching specifications
Layer 2 Switching
Spanning tree802.1D STP, 802.1w RSTP, BPDU filtering, loop protection
Link aggregationLACP or manual, up to 16 trunks, max 8 ports per trunk
MulticastIGMP v1, v2 snooping
DiscoveryLLDP and LLDP-MED
QoSCoS by DSCP or IEEE 802.1p, four hardware queues
MonitoringPort mirroring by port or VLAN
Auto recoveryBPDU Guard, Storm Control, Port Security, Loop Protection, Link Flap Prevention
Management specifications
Management
OptionsInstant On Cloud Portal; Mobile App; Web Browser; SNMP Manager
SNMPSNMPv1, v2c (read only)
Local web sessionsUp to 5 HTTP / HTTPS
File transferSCP and TFTP; dual image support (primary and secondary)
DiagnosticsEvent logs, session logging, remote syslog, cable diagnostics, Ping IPv4
Security specifications
Security
Hardware root of trustTPM 2.0
DoS protectionAutomatic denial-of-service protection
Storm controlGlobal Storm Control
Cloud accountTwo-Factor Authentication (2FA)
Management encryptionHTTPS / SSL
Supported Transceivers specifications
Supported Transceivers
R9D16AInstant On 1G SFP LC SX 500 m OM2 MMF transceiver
S0G20AInstant On 1G LX SFP LC 10 km SMF transceiver
R9D17A / R9D17BInstant On 1G SFP RJ45 100 m Cat5e transceiver
Compliance & Warranty specifications
Compliance & Warranty
SafetyEN/IEC 62368-1 2nd & 3rd Ed.; UL 62368-1 3rd Ed.; CAN/CSA C22.2 No. 62368-1 3rd Ed.; EN/IEC 60825-1:2014 Class 1
EmissionsEN 55032:2015/CISPR 32 Class A; FCC CFR 47 Part 15:2018 Class A; ICES-003 Class A; VCCI-32 Class A; CNS 13438 Class A; KS C 9832 Class A; AS/NZS CISPR 32 Class A
ImmunityBS/EN 55035, CISPR 35, KS C 9835; IEC 61000-4-2/-3/-4/-5/-6/-8/-11
WarrantyHPE Networking Instant On limited lifetime; 24x7 phone support for 90 days, chat support for the warranty period

Specifications sourced from the official HPE Networking catalogue. Where official pages disagree on a value, it is marked and confirmed during quotation.

Overview

About the S5E31A

The HPE Networking Instant On Switch 48p Gigabit 24p CL4 PoE 4p SFP 370W 1840 (S5E31A) is the flagship of the Series 1840: 48 gigabit access ports of which the first 24 supply IEEE 802.3at Class 4 PoE within a 370 W budget, plus four dedicated 1G SFP uplink ports.

It carries the largest PoE budget in the series by a wide margin — 370 W against 195 W on the 24-port S5E29A — and pairs it with the 48-port hardware platform: a 1.25 GHz processor, 512 MB of flash and a 4 MB packet buffer, giving 104 Gbps of switching capacity and 77.37 Mpps of forwarding. Egress ACLs are supported with 512 entries, and link aggregation groups take up to 8 members.

Three fixed fans handle the combined 48-port and 370 W PoE load, yet HPE rates the unit at 3.4 Bel sound power — quieter than the non-PoE S5E30A's 3.9 Bel. At full traffic and full PoE it draws 466.1 W at 100–127 V, which is the figure to size the rack circuit and UPS against.

Applications

Where the S5E31A is deployed

Twenty-four powered drops with 370 W, plus 24 unpowered ports.

The largest PoE budget in the series for camera density.

One rack unit serving a full floor of mixed devices.

Replaces two switches where powered and unpowered drops are mixed.

Downloads

S5E31A documents

Datasheets and manuals are shared without sign-up. Documents not yet hosted online are sent on request within working hours.

  • HPE Networking Instant On Switch Series 1840 QuickSpecs (PDF)Download

Related Products

Pairs with the S5E31A

Edge PoE switches below it, SFP+ modules in its uplinks, and sibling models for smaller or larger sites.

Why Buy From Lizora Infotech

A supply partner, not just a price list

Ready Stock Availability

Fast-moving SKUs held in the Delhi NCR warehouse, with availability confirmed on every quotation.

PAN India Supply Network

Surface and air cargo delivery to every state, with GST invoicing and e-way bills handled end to end.

BOQ & Solution Consultation

Bill-of-quantities reviewed line by line, with alternatives suggested for out-of-stock or discontinued items.

Technical Pre-Sales Consulting

Switch sizing, PoE budgets, VLAN design, and GPON planning reviewed by our technical team before you commit.

Dedicated B2B Sales Support

A named point of contact for quotes, stock checks, and RMA — not a ticket queue.

Before You Enquire

Frequently asked questions

How many ports on the S5E31A supply PoE?

Twenty-four of the forty-eight access ports — ports 1 to 24 — supply IEEE 802.3at Class 4 PoE at up to 30 W each within a 370 W total budget. Ports 25 to 48 are standard copper with no power.

What circuit does the S5E31A need at full load?

At 100% traffic with 100% PoE it draws 466.1 W at 100–127 V or 452.6 W at 200–220 V, with a rated current of 4.7 / 2.3 A. Heat dissipation reaches 1590.3 BTU/hr. Size the rack circuit and UPS against those figures.

Is the S5E31A louder than the non-PoE 48-port model?

No — it is quieter despite having three fans against one. HPE rates the S5E31A at 3.4 Bel sound power and 20 dB bystander sound pressure, against 3.9 Bel and 25 dB for the S5E30A.

Compare the S5E30A

S5E31A or two S5E29A switches?

The S5E31A gives 24 PoE ports and 370 W in one 1U unit with 104 Gbps capacity. Two S5E29A units give 32 PoE ports and 390 W total but occupy 2U, need two uplink sets and cap at 56 Gbps each. Choose the S5E31A for consolidation, the pair where the drops are physically split across two areas.

Does the S5E31A support egress ACLs?

Yes, with 512 entries — a capability shared only with the S5E30A. The 8-port and 24-port models in the series do not support egress IPv4/MAC ACLs.

What is the price of the HPE S5E31A in India?

Pricing is quotation-based with dealer slabs for registered partners. Name the S5E31A and quantity in a quote request and you receive priced options with confirmed availability within 24 working hours.

Request pricing

Tell us what you need — get a quote today

Four fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.

Send your requirement, get a quote today

Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.

Prefer to talk? +91 98910 20998