Industrial Switches- 8× GbE PoE+
- 240 W
- -40 to +65 °C
Solution
Plant networks that survive the shop floor
Industrial switching and segregated networks for factories — OT/IT separation, DIN-rail hardware for panels and cabinets, and PoE for cameras at the harsh edge.
- Ready Stock
- PAN India Supply
- Same Day Dispatch*
- GST Billing
- BOQ Assistance
*Same-day dispatch applies to in-stock items ordered before cut-off from the Delhi NCR warehouse.
Overview
About manufacturing network solutions
On a shop floor the network shares space with machinery, heat, dust, and vibration, and it carries two very different kinds of traffic: operational technology — PLCs, sensors, and control systems — and standard IT. Keeping those apart, and keeping the hardware running in a control panel rather than a server room, is what separates a plant network from an office one.
This solution uses industrial, DIN-rail, fanless switching rated for the temperature and dust of factory cabinets, VLAN segmentation to keep OT traffic away from IT and CCTV, and fibre uplinks that carry no induced voltage between buildings on different earth potentials. PoE powers cameras and edge devices at the harsh edge.
The protocols are standard Ethernet; the difference is entirely in the operating envelope and the discipline of segregation, both of which are confirmed per site during planning.
Common Challenges
What this solution solves
Recommended Product Categories
Where to start in the catalogue
The categories most relevant to this deployment. Every product ships from ready stock with GST billing and PAN-India delivery.
- Managed SwitchesL2/L2+ switches with VLAN, QoS, and CLI/cloud controlExplore range
- PoE SwitchesPower cameras, APs, and phones over a single cableExplore range
- Industrial SwitchesDIN-rail, wide-temperature, surge-protectedExplore range
- Media ConvertersFiber-to-copper conversion for long runsExplore range
Recommended Products
Models that fit this deployment
From the official Lysora catalogue, matched to the requirements above. Final selection is confirmed against your BOQ.
- Industrial Switches
Industrial Switches- 7× PoE+ + 1× PoE++
- 300 W max
- -40 to +75 °C
Wireless Access Points- Outdoor IP65
- Wi-Fi 7 BE5040
- -30 to +65 °C
Managed Switches- 24× RJ45
- 4× SFP
- Fanless 1U
Deployment Workflow
From planning to support
1. Planning
We work from your device counts, coverage areas, and growth plans to define the topology, VLAN plan, and power budget before anything is quoted.
2. Site survey
Cable routes, rack and cabinet locations, environmental conditions, and existing infrastructure are confirmed — on site or from your drawings.
3. BOQ & quotation
A line-by-line bill of quantities with stock status, priced within 24 working hours, with alternatives suggested for anything out of stock.
4. Installation
Hardware is dispatched with GST invoice and e-way bill. Installation is handled by your team or your integrator; we supply the equipment and documentation.
5. Configuration
VLANs, uplinks, PoE budgets, SSIDs, and management are configured to the plan agreed at the planning stage. Configuration support is available on request.
6. Testing
Links, power delivery, roaming, and throughput are verified against the design before handover, so issues surface before the network goes live.
7. Support
A named point of contact for stock, RMA, and replacements under the standard manufacturer warranty, serviced in India by Lizora Infotech.
Deployment Considerations
Practical advice for this deployment
- Segregate OT — PLCs, sensors, and control systems — from IT and CCTV using VLANs, so a fault or compromise in one cannot reach control systems.
- Use DIN-rail, fanless, wide-temperature switching in panels, cabinets, and unconditioned areas; commercial switches fail early there.
- Confirm the available panel DC voltage against the PoE budget — full PoE output often needs the upper part of the input range.
- Prefer fibre uplinks between buildings for distance and immunity from induced voltage across differing earth potentials.
- Ring or redundant-path topology and surge protection are designed per site; specifics depend on the plant layout and are scoped at survey.
Before You Enquire
Frequently asked questions
How do you separate control systems from IT traffic?
OT traffic — PLCs, sensors, and control systems — runs on its own VLAN, logically separated from IT and CCTV on shared industrial cabling. This keeps a broadcast storm or a compromised device on one segment from reaching control systems.
Industrial Ethernet basicsWhy can't I use commercial switches in the plant?
Commercial switches are rated for roughly 0–50 °C in ventilated rooms. Factory panels and cabinets run hotter and dustier, so industrial, fanless, wide-temperature switches are used there for reliability, not performance.
Industrial switch buying guideCan the switches run from panel DC power?
Yes. Industrial switches accept a wide DC input range and mount on DIN rail beside PLCs. Where they also supply PoE, the available DC voltage is checked against the PoE budget, since full output often needs the upper voltage range.
Do you design redundant topologies for production lines?
Ring and redundant-path designs reduce the impact of a single cable fault on a running line. The specific topology and surge protection are designed per site against the plant layout at survey.
What certifications do the industrial switches carry?
Certifications are as published by the manufacturer on each product datasheet; we do not claim compliance beyond what is documented. Confirm project-critical certifications on the datasheet before ordering.
See industrial switchesRelated Resources
Background reading
Guides from our technical team relevant to this deployment.
Related Solutions
Solutions often planned together
Adjacent deployments that share equipment and design decisions.
- Warehouse Connectivity SolutionsRugged switching and wide-area wireless for warehouses and yards — scanner and forklift coverage, long cable runs solved with fibre, and cameras over PoE.Explore range
- Surveillance Network SolutionsPoE backbones for IP CCTV — camera counts sized against the power budget, a segregated surveillance VLAN, and industrial switching for outdoor and harsh sites.Explore range
- Campus Network SolutionsCore-to-access design for multi-building campuses — fibre aggregation, Layer 3 routing where it earns its cost, multi-gig backhaul, and consistent Wi-Fi throughout.Explore range
Related Industries
Sectors that deploy this
Industry pages with sector-specific requirements and recommendations.
Tell us what you need — get a quote today
Four fields, no account, no attachments needed. Our sales team calls back within working hours with pricing and stock status.
Send your requirement, get a quote today
Share a BOQ, a part list, or just a description of the site — our sales team responds within working hours with pricing and stock confirmation.
Prefer to talk? +91 98910 20998